Hidden frame glass doors are excellent ways to open your home to the outside world. Besides their aesthetic values, the doors let in plenty of fresh air, even with minimal space. Other homeowners invest in these doors to create a perfect indoor-outdoor living space. It removes obstructing views and provides seamless access to the patio area or garden.
When investing in hidden frame glass doors, you may consider their effectiveness, including their tendency to leak. This article explains everything you should know about glass door leaks, including their common causes and solutions.
Common Causes of Glass Door Leaks
Glass door leaks can occur due to the following:
Dirt and dust from shoes, gusts of wind, muddy paws, and other sources can get into the door tracks. The particles build over time and may lead to misalignment or door separation from its tracks. This would create a significant gap that water can pass through.
One way to solve this is using a vacuum to remove grit from the door track as much as possible. Sometimes they can be too hardened, and vacuum cleaning may not be effective. In such cases, opt for the cleaning services of a professional glass door installation team. They have the tools and expertise to remove grit and align your door to its track.
Broken Rollers or Track
A broken or dented track can break the seal with the door and let water in. Door rollers also wear with time, pushing the door off its tracks, which can cause leaks.
You can solve this by talking to a hidden frame glass door expert near you. They can check and repair the rollers and tracks.
Blocked Weep Holes
Most glass doors have built-in protection against misdirected rain. Even when the installers do a perfect job during the installation, rain may still blow into the track. Weep holes placed on the glass doors drain water from the track. Debris following the same route from the door can clog these holes. The water will then flood the track and leak into the house.
Pinpoint the leak by finding where your doors’ weep holes are located. Determine if debris, paint, or caulking are blocking the holes. Unclog them using a pin and vacuum to remove the remaining dirt.
Glass can unseal over time due to improper installation or severe water damage. The unsealed glass may allow water to enter the home from the side or top of the glass plane. If left unattended, the gap will grow, pushing the glass away or causing it to break.
Consult a local glass repair specialist to determine the cause and the best action.
Lack of Weather Stripping
Although a well-maintained glass door may not have issues with water intrusion, most owners can add another layer of protection. New weatherstripping can reduce the risk of intruding water by reinforcing the door seal. Typical weatherstripping consists of a rubber tube or thick foam tape at the bottom of the door. It latches to keep it tight and close any gaps that may exist.
Broken Door Flashing
The base of some glass doors has a line of metal flashing to redirect water away. The door flashing is necessary for doors that sit flush with the patio or ground where water passes. A dent on the flashing can affect its efficiency, letting water seep into the house.
Other doors also have a door flashing above the frame. It keeps water from above away from the house and the gaps in the door. Door flashing requires professional installation. Consult an experienced glass door specialist to adjust the parts or place the flashing on your door.
Read Also: Qualities of a Reliable Pain Management Dr
Protec Your Hidden Frame Glass Doors From Costly Water Damage
Solutions for mitigating glass door leaks include using quality materials, hiring professional installation experts, and proper care and maintenance. Call glass door installation or repair professionals if you notice water entering your home through hidden frame glass doors. They will inspect and repair the door to fix any moisture issues.